TO ORDER AN “ALL-OVER PRINT”

DESIGN THE PRINT

• Create it yourself

• Or hire FABRIC’s Textile Designer (Select Textile Print Design under Services in your FABRIC Membership Dashboard)

 

SOURCE MATERIAL

• Source your printable fabric by checking out the list of approved fabrics or sourcing a different fabric.

• Use FABRIC’s free sourcing library to source anything. (Select Sourcing Library under Spaces in your FABRIC Membership Dashboard).

• Or use our in-stock Dintex fabric! 

 

SHIP MATERIAL TO FABRIC

Send to: 

FABRIC

Attn: (whoever you’ve been working with on print design)

117 E. 5th St., Suite 101

Tempe, AZ 85281

• Make sure your company name and/or your name is included on the roll somewhere or we will not know it is your fabric. You might ask the fabric supplier to include this info.

• Or you could have the fabric sent to you first and then attach a Drop Off form to the fabric before delivering it yourself (recommended method). FABRIC is not responsible for lost fabrics that are not labeled properly with your information. 

 

SUBMIT THE PRINT DESIGN

Email your print file (pdf) to us.

It must be less than the width of your fabric (remember fabric has an un-usable selvage edge that varies but is usually around ½” on each side so leaving 1” on each side is the rule of thumb).

Note: If your artwork is currently a seamless graphic that is a 12” square and you're wanting it to repeat, it is NOT ready to be printed. A graphic artist would need to repeat the 12” square across the width of your fabric horizontally and then vertically down the length of your fabric (to approximately 1 yard) and then save it as a PDF. This is a print-ready file.

 

SUBMIT A PRINT REQUEST

Send a Print Request to info@fabricincubator.com for a price estimate. Once the estimate is confirmed and the payment is received, your print job will be completed.